Free shipping on all orders over $500

Flat rate $15 shipping on all orders under $500

  • Free shipping over $500

  • Parts Ship from Canada

  • 30 Day Return Policy

  • No Brokerage or Duties

How to Install: 2015-2021 Chevrolet Colorado LED Ditch Light Kit

2015-2021 Chevy Colorado with Stage Series Ditch Light Kit installed

The Stage Series Backlit Ditch Light Kit for the 2015-2021 Chevy Colorado mounts two SSC2 or SS3 backlit pods above the hood using CAD-designed brackets that bolt to factory mounting points. No cutting or drilling required — the low-profile design minimizes glare and doesn't interfere with hood operation. Here's the full walkthrough.

2015-2021 Chevy Colorado with Stage Series Ditch Light Kit installed

Table of Contents

Installation Video

 

Tools Required

  • Masking tape
  • 13mm socket

Mounting Instructions

Step 1 — Mark the Hood Hinge
Open the hood and mark the location of the hood hinges with tape. Tape the edges of the hood to prevent scratching during installation.

Step 2 — Loosen the Factory Hood Bolts
Loosen the two 13mm bolts securing the hood hinge while holding the back of the hood.

Step 3 — Install the Ditch Light Bracket
Place the ditch light bracket under the hinge and align the holes. Adjust the bracket to leave a slight gap at the back of the hood before tightening. Secure the bracket and hood hinge with the original bolts, making sure the hinge lines up with your tape marks.

Step 4 — Verify Fitment
Carefully close the hood and confirm no contact is made between the bracket and the plastic cowl. Ensure the hood latches properly, gaps are uniform with the fenders, and the windshield wipers clear the ditch light bracket. If fitment isn't right, adjust the hood and/or bracket position as needed.

Step 5 — Assemble and Mount the Pods
Assemble your SSC2 or SS3 LED pods per the included assembly guide. Place the assembled pod on top of the ditch light bracket. Feed the carriage bolt through the universal bracket and ditch light bracket, followed by the washer, lock washer, and nut underneath. Tighten hand-tight to allow for aiming adjustment. Make final aiming adjustments, then tighten securely. Repeat on the other side. The install is complete.

Questions About the Install?

If you run into any issues during the installation, contact Ess K Customs — as an authorized Diode Dynamics dealer, we're here to help.

Shop Colorado Lighting at Ess K Customs

Looking for lighting upgrades for your 2015-2021 Chevy Colorado? As an authorized Diode Dynamics dealer, Ess K Customs carries genuine products with full manufacturer warranty.

Browse Colorado Ditch Light Kits at Ess K Customs →

This install guide applies to Diode Dynamics SKUs: DD6645, DD6646, DD6647, DD6648, DD6649, DD6650, DD6651, DD6652, DD6653

Leave a comment