{"title":"Tazer Programmers","description":"","products":[{"product_id":"tazer-programmer-chrysler-300-2011-2023","title":"Tazer Programmer - Chrysler 300 (2011-2023)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e2018+ Models: Due to the addition of a security module, a Double Bypass or Security Gateway Bypass Module is REQUIRED for the Tazer to function!\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePLEASE READ THE USER MANUAL TO SEE THE FULL FUNCTION LIST!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeature Enable\u003c\/strong\u003e: The Tazer can unlock SRT Drive modes, including Track, Valet, ECO (2015-18 Scat Pack), enable factory Sport Mode (5 speed and 8 speed), SRT EVIC Performance pages, and SRT performance pages* in the Uconnect 8.4 radio. Enable paddle shifters if you add the factory paddle-equipped steering wheel. Enable factory fog lights, backup camera, extra video input and more. Disable TPMS.  Change DRL’s. Enable Shift Light on 2015+ (6.4L). Disable in motion navigation lockout. Disable seatbelt reminder chime. And more, see the user guide for a full list.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLine Lock: \u003c\/strong\u003ePress 2 steering wheel buttons while stopped, and the ABS valves will hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing required! This is an ideal alternative to the traditional plumbed-in solenoid type line lock\/roll control. Super simple and cannot be detected! When Line Lock is in use, it temporarily disables traction control and for AWD cars, keeps the car in RWD mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLight Shows:\u003c\/strong\u003e Using the key fob or steering wheel buttons and added dash menu, turn on a light show that flashes the exterior lights in 9 different patterns – there are 6 pre-configured patterns and 3 make-your-own.  Perfect for car shows and parades. (can be unlocked for in-motion use, only for legal emergency use.  Contact tech support for instructions)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3rd Brake Flash:\u003c\/strong\u003e Set rate and number of flashes to pulse the 3rd brake light when brakes are applied for increased visibility\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Engine Mode:\u003c\/strong\u003e This allows you to choose which engine mode to stay in.  Very useful on 2015+, where you want the active exhaust to remain open with increased throttle response without the transmission being in track mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Transmission Mode:\u003c\/strong\u003e This allows you to choose which transmission mode to stay in.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Power Mode:\u003c\/strong\u003e Force key mode (Black\/Red\/Valet)  For Hellcats, you can force red key performance while using the black key.  For most 2015+, you can force valet mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStartup Drive Mode:\u003c\/strong\u003e Like driving in Sport or Track mode every time you get in your car?  Tazer can set the startup drive mode for you, so you don’t need to switch modes every time you get in the car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAuto stop-start Disable:\u003c\/strong\u003e If you have a Grand Cherokee or Durango with Auto StopStart, you may find it annoying and want it to default OFF.  The Tazer can do this for you, no need to press that disable button every time you start the car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSteering Wheel shifting**\u003c\/strong\u003e(SWS): This allows you to use your steering wheel’s cruise+\/- buttons to manually control gear shift while keeping your hands on the wheel. SWS mode is enabled after placing the vehicle in AutoStick mode using the console shifter. Once in AutoStick, use the cruise buttons to shift (only when cruise control is turned off)! This feature can be enabled or disabled at any time using the steering wheel buttons.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAutoUpshift**\u003c\/strong\u003e: Set your own shift points when in AutoStick – Using steering wheel buttons or ZPU Utility, dial in any RPM for upshifts in AutoStick mode – perfect for high-power high-revving track use. This feature requires that “sport mode” is enabled (2012-2014 only).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePeak RPM Display: \u003c\/strong\u003eWill display actual shift RPMs after each shift – great when adjusting AutoUpshift to squeeze every last bit out of that high revving cam, or to check what RPM you hit when shifting manually.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e0 to 30 and 0 to 60 Timer\u003c\/strong\u003e: Will display 0 to 30 and 0 to 60 times on EVIC display. Good for the 2011’s that can’t enable SRT pages.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce AWD modes\u003c\/strong\u003e: On AWD models, force the AWD system to stay in RWD or AWD, instead of letting the car decide on its own. Good for racing, drifting, etc. Or set it back to “normal” whenever you wish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset Adaptives: \u003c\/strong\u003eWill reset TCM adaptives any time you wish with a simple push of the “BACK” and cruise on\/off buttons.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eESP full on\/off\u003c\/strong\u003e: Press and hold the ESP button for 7 seconds to TOTALLY disable the ESP, ABS, AWD systems. Press and hold again to turn it back on.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRemote Windows: \u003c\/strong\u003eRaise and lower front windows from the keyfob.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eButton Remapping\u003c\/strong\u003e: Use the Adaptive Cruise distance buttons (when ACC is off), or install\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e “Aux” buttons \u003c\/strong\u003e\u003c\/em\u003eor viper cruise button bank and map the buttons for quick access to many of Tazer’s functions.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e …and more.  Check out the user guide for details.\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e*Uconnect performance pages on 8.4″ Uconnect only (2012-2014). EVIC SRT menu and Sport Mode are available on the 4.3″ screen.\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**not on 8-speed vehicles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eINSTALLATION IS A SIMPLE MATTER OF PLUGGING IT INTO THE DIAGNOSTIC OBD2 PORT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2018 and up require installing Double Bypass harness or Bypass Module\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Z Automotive","offers":[{"title":"No My Chrysler is a 2011-2017","offer_id":41040366272677,"sku":"Z_TZR","price":349.0,"currency_code":"CAD","in_stock":true},{"title":"Yes My Chrysler is a 2018-2023","offer_id":41040366305445,"sku":"Z_TZR, Z_DBP","price":427.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/1_886891ed-b3c5-4974-b11c-484f90393500.png?v=1772575065"},{"product_id":"tazer-programmer-dodge-challenger-2015-2023","title":"Tazer Programmer - Dodge Challenger (2015-2023)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e2018+ Models: Due to the addition of a security module, a Double Bypass or Security Gateway Bypass Module is REQUIRED for the Tazer to function!\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePLEASE READ THE USER MANUAL TO SEE THE FULL FUNCTION LIST!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeature Enable\u003c\/strong\u003e: The Tazer can unlock SRT Drive modes, including Track, Valet, ECO (2015-18 Scat Pack), enable factory Sport Mode (5 speed and 8 speed), SRT EVIC Performance pages, and SRT performance pages* in the Uconnect 8.4 radio. Enable paddle shifters if you add the factory paddle-equipped steering wheel. Enable factory fog lights, backup camera, extra video input and more. Disable TPMS.  Change DRL’s. Enable Shift Light on 2015+ (6.4L). Disable in motion navigation lockout. Disable seatbelt reminder chime. And more, see the user guide for a full list.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLine Lock: \u003c\/strong\u003ePress 2 steering wheel buttons while stopped, and the ABS valves will hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing required! This is an ideal alternative to the traditional plumbed-in solenoid type line lock\/roll control. Super simple and cannot be detected! When Line Lock is in use, it temporarily disables traction control and for AWD cars, keeps the car in RWD mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLight Shows:\u003c\/strong\u003e Using the key fob or steering wheel buttons and added dash menu, turn on a light show that flashes the exterior lights in 9 different patterns – there are 6 pre-configured patterns and 3 make-your-own.  Perfect for car shows and parades. (can be unlocked for in-motion use, only for legal emergency use.  Contact tech support for instructions)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3rd Brake Flash:\u003c\/strong\u003e Set rate and number of flashes to pulse the 3rd brake light when brakes are applied for increased visibility\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Engine Mode:\u003c\/strong\u003e This allows you to choose which engine mode to stay in.  Very useful on 2015+, where you want the active exhaust to remain open with increased throttle response without the transmission being in track mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Transmission Mode:\u003c\/strong\u003e This allows you to choose which transmission mode to stay in.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Power Mode:\u003c\/strong\u003e Force key mode (Black\/Red\/Valet)  For Hellcats, you can force red key performance while using the black key.  For most 2015+, you can force valet mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStartup Drive Mode:\u003c\/strong\u003e Like driving in Sport or Track mode every time you get in your car?  Tazer can set the startup drive mode for you, so you don’t need to switch modes every time you get in the car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAuto stop-start Disable:\u003c\/strong\u003e If you have a Grand Cherokee or Durango with Auto StopStart, you may find it annoying and want it to default OFF.  The Tazer can do this for you, no need to press that disable button every time you start the car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSteering Wheel shifting**\u003c\/strong\u003e(SWS): This allows you to use your steering wheel’s cruise+\/- buttons to manually control gear shift while keeping your hands on the wheel. SWS mode is enabled after placing the vehicle in AutoStick mode using the console shifter. Once in AutoStick, use the cruise buttons to shift (only when cruise control is turned off)! This feature can be enabled or disabled at any time using the steering wheel buttons.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAutoUpshift**\u003c\/strong\u003e: Set your own shift points when in AutoStick – Using steering wheel buttons or ZPU Utility, dial in any RPM for upshifts in AutoStick mode – perfect for high-power high-revving track use. This feature requires that “sport mode” is enabled (2012-2014 only).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePeak RPM Display: \u003c\/strong\u003eWill display actual shift RPMs after each shift – great when adjusting AutoUpshift to squeeze every last bit out of that high revving cam, or to check what RPM you hit when shifting manually.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e0 to 30 and 0 to 60 Timer\u003c\/strong\u003e: Will display 0 to 30 and 0 to 60 times on EVIC display. Good for the 2011’s that can’t enable SRT pages.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce AWD modes\u003c\/strong\u003e: On AWD models, force the AWD system to stay in RWD or AWD, instead of letting the car decide on its own. Good for racing, drifting, etc. Or set it back to “normal” whenever you wish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset Adaptives: \u003c\/strong\u003eWill reset TCM adaptives any time you wish with a simple push of the “BACK” and cruise on\/off buttons.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eESP full on\/off\u003c\/strong\u003e: Press and hold the ESP button for 7 seconds to TOTALLY disable the ESP, ABS, AWD systems. Press and hold again to turn it back on.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRemote Windows: \u003c\/strong\u003eRaise and lower front windows from the keyfob.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eButton Remapping\u003c\/strong\u003e: Use the Adaptive Cruise distance buttons (when ACC is off), or install\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e “Aux” buttons \u003c\/strong\u003e\u003c\/em\u003eor viper cruise button bank and map the buttons for quick access to many of Tazer’s functions.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e …and more.  Check out the user guide for details.\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e*Uconnect performance pages on 8.4″ Uconnect only (2012-2014). EVIC SRT menu and Sport Mode are available on the 4.3″ screen.\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**not on 8-speed vehicles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eINSTALLATION IS A SIMPLE MATTER OF PLUGGING IT INTO THE DIAGNOSTIC OBD2 PORT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2018 and up require installing Double Bypass harness or Bypass Module\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Z Automotive","offers":[{"title":"No My Challenger is a 2015-2017","offer_id":41040378757285,"sku":"Z_TZR","price":349.0,"currency_code":"CAD","in_stock":true},{"title":"Yes My Challenger is a 2018-2023","offer_id":41040378790053,"sku":"Z_TZR, Z_DBP","price":427.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/3_9e6b71b0-b0fa-4354-a722-3034ffed1110.png?v=1772575223"},{"product_id":"tazer-programmer-dodge-charger-2011-2023","title":"Tazer Programmer - Dodge Charger (2011-2023)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e2018+ Models: Due to the addition of a security module, a Double Bypass or Security Gateway Bypass Module is REQUIRED for the Tazer to function!\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePLEASE READ THE USER MANUAL TO SEE THE FULL FUNCTION LIST!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeature Enable\u003c\/strong\u003e: The Tazer can unlock SRT Drive modes, including Track, Valet, ECO (2015-18 Scat Pack), enable factory Sport Mode (5 speed and 8 speed), SRT EVIC Performance pages, and SRT performance pages* in the Uconnect 8.4 radio. Enable paddle shifters if you add the factory paddle-equipped steering wheel. Enable factory fog lights, backup camera, extra video input and more. Disable TPMS.  Change DRL’s. Enable Shift Light on 2015+ (6.4L). Disable in motion navigation lockout. Disable seatbelt reminder chime. And more, see the user guide for a full list.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLine Lock: \u003c\/strong\u003ePress 2 steering wheel buttons while stopped, and the ABS valves will hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing required! This is an ideal alternative to the traditional plumbed-in solenoid type line lock\/roll control. Super simple and cannot be detected! When Line Lock is in use, it temporarily disables traction control and for AWD cars, keeps the car in RWD mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLight Shows:\u003c\/strong\u003e Using the key fob or steering wheel buttons and added dash menu, turn on a light show that flashes the exterior lights in 9 different patterns – there are 6 pre-configured patterns and 3 make-your-own.  Perfect for car shows and parades. (can be unlocked for in-motion use, only for legal emergency use.  Contact tech support for instructions)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3rd Brake Flash:\u003c\/strong\u003e Set rate and number of flashes to pulse the 3rd brake light when brakes are applied for increased visibility\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Engine Mode:\u003c\/strong\u003e This allows you to choose which engine mode to stay in.  Very useful on 2015+, where you want the active exhaust to remain open with increased throttle response without the transmission being in track mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Transmission Mode:\u003c\/strong\u003e This allows you to choose which transmission mode to stay in.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Power Mode:\u003c\/strong\u003e Force key mode (Black\/Red\/Valet)  For Hellcats, you can force red key performance while using the black key.  For most 2015+, you can force valet mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStartup Drive Mode:\u003c\/strong\u003e Like driving in Sport or Track mode every time you get in your car?  Tazer can set the startup drive mode for you, so you don’t need to switch modes every time you get in the car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAuto stop-start Disable:\u003c\/strong\u003e If you have a Grand Cherokee or Durango with Auto StopStart, you may find it annoying and want it to default OFF.  The Tazer can do this for you, no need to press that disable button every time you start the car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSteering Wheel shifting**\u003c\/strong\u003e(SWS): This allows you to use your steering wheel’s cruise+\/- buttons to manually control gear shift while keeping your hands on the wheel. SWS mode is enabled after placing the vehicle in AutoStick mode using the console shifter. Once in AutoStick, use the cruise buttons to shift (only when cruise control is turned off)! This feature can be enabled or disabled at any time using the steering wheel buttons.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAutoUpshift**\u003c\/strong\u003e: Set your own shift points when in AutoStick – Using steering wheel buttons or ZPU Utility, dial in any RPM for upshifts in AutoStick mode – perfect for high-power high-revving track use. This feature requires that “sport mode” is enabled (2012-2014 only).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e0 to 30 and 0 to 60 Timer\u003c\/strong\u003e: Will display 0 to 30 and 0 to 60 times on EVIC display. Good for the 2011’s that can’t enable SRT pages.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce AWD modes\u003c\/strong\u003e: On AWD models, force the AWD system to stay in RWD or AWD, instead of letting the car decide on its own. Good for racing, drifting, etc. Or set it back to “normal” whenever you wish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset Adaptives: \u003c\/strong\u003eWill reset TCM adaptives any time you wish with a simple push of the “BACK” and cruise on\/off buttons.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eESP full on\/off\u003c\/strong\u003e: Press and hold the ESP button for 7 seconds to TOTALLY disable the ESP, ABS, AWD systems. Press and hold again to turn it back on.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRemote Windows: \u003c\/strong\u003eRaise and lower front windows from the keyfob.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eButton Remapping\u003c\/strong\u003e: Use the Adaptive Cruise distance buttons (when ACC is off), or install\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e “Aux” buttons \u003c\/strong\u003e\u003c\/em\u003eor viper cruise button bank and map the buttons for quick access to many of Tazer’s functions.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e …and more.  Check out the user guide for details.\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e*Uconnect performance pages on 8.4″ Uconnect only (2012-2014). EVIC SRT menu and Sport Mode are available on the 4.3″ screen.\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**not on 8-speed vehicles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eINSTALLATION IS A SIMPLE MATTER OF PLUGGING IT INTO THE DIAGNOSTIC OBD2 PORT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2018 and up require installing Double Bypass harness or Bypass Module\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Z Automotive","offers":[{"title":"No My Charger is a 2011-2017","offer_id":41040387506341,"sku":"Z_TZR","price":349.0,"currency_code":"CAD","in_stock":true},{"title":"Yes My Charger is a 2018-2023","offer_id":41040387539109,"sku":"Z_TZR, Z_DBP","price":427.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/2_e2ab397f-52e6-499b-8a30-68c57a7c8305.png?v=1772575223"},{"product_id":"tazer-programmer-jeep-grand-cherokee-2014-2023","title":"Tazer Programmer - Jeep Grand Cherokee (2014-2021)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e2018+ Models: Due to the addition of a security module, a Double Bypass or Security Gateway Bypass Module is REQUIRED for the Tazer to function!\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePLEASE READ THE USER MANUAL TO SEE THE FULL FUNCTION LIST!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeature Enable\u003c\/strong\u003e: The Tazer can unlock SRT Drive modes, including Track, Valet, ECO (2015-18 Scat Pack), enable factory Sport Mode (5 speed and 8 speed), SRT EVIC Performance pages, and SRT performance pages* in the Uconnect 8.4 radio. Enable paddle shifters if you add the factory paddle-equipped steering wheel. Enable factory fog lights, backup camera, extra video input and more. Disable TPMS.  Change DRL’s. Enable Shift Light on 2015+ (6.4L). Disable in motion navigation lockout. Disable seatbelt reminder chime. And more, see the user guide for a full list.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLine Lock: \u003c\/strong\u003ePress 2 steering wheel buttons while stopped, and the ABS valves will hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing required! This is an ideal alternative to the traditional plumbed-in solenoid type line lock\/roll control. Super simple and cannot be detected! When Line Lock is in use, it temporarily disables traction control and for AWD cars, keeps the car in RWD mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLight Shows:\u003c\/strong\u003e Using the key fob or steering wheel buttons and added dash menu, turn on a light show that flashes the exterior lights in 9 different patterns – there are 6 pre-configured patterns and 3 make-your-own.  Perfect for car shows and parades. (can be unlocked for in-motion use, only for legal emergency use.  Contact tech support for instructions)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3rd Brake Flash:\u003c\/strong\u003e Set rate and number of flashes to pulse the 3rd brake light when brakes are applied for increased visibility\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Engine Mode:\u003c\/strong\u003e This allows you to choose which engine mode to stay in.  Very useful on 2015+, where you want the active exhaust to remain open with increased throttle response without the transmission being in track mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Transmission Mode:\u003c\/strong\u003e This allows you to choose which transmission mode to stay in.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Power Mode:\u003c\/strong\u003e Force key mode (Black\/Red\/Valet)  For Hellcats, you can force red key performance while using the black key.  For most 2015+, you can force valet mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStartup Drive Mode:\u003c\/strong\u003e Like driving in Sport or Track mode every time you get in your car?  Tazer can set the startup drive mode for you, so you don’t need to switch modes every time you get in the car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAuto stop-start Disable:\u003c\/strong\u003e If you have a Grand Cherokee or Durango with Auto StopStart, you may find it annoying and want it to default OFF.  The Tazer can do this for you, no need to press that disable button every time you start the car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSteering Wheel shifting**\u003c\/strong\u003e(SWS): This allows you to use your steering wheel’s cruise+\/- buttons to manually control gear shift while keeping your hands on the wheel. SWS mode is enabled after placing the vehicle in AutoStick mode using the console shifter. Once in AutoStick, use the cruise buttons to shift (only when cruise control is turned off)! This feature can be enabled or disabled at any time using the steering wheel buttons.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAutoUpshift**\u003c\/strong\u003e: Set your own shift points when in AutoStick – Using steering wheel buttons or ZPU Utility, dial in any RPM for upshifts in AutoStick mode – perfect for high-power high-revving track use. This feature requires that “sport mode” is enabled (2012-2014 only).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePeak RPM Display: \u003c\/strong\u003eWill display actual shift RPMs after each shift – great when adjusting AutoUpshift to squeeze every last bit out of that high revving cam, or to check what RPM you hit when shifting manually.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e0 to 30 and 0 to 60 Timer\u003c\/strong\u003e: Will display 0 to 30 and 0 to 60 times on EVIC display. Good for the 2011’s that can’t enable SRT pages.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce AWD modes\u003c\/strong\u003e: On AWD models, force the AWD system to stay in RWD or AWD, instead of letting the car decide on its own. Good for racing, drifting, etc. Or set it back to “normal” whenever you wish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset Adaptives: \u003c\/strong\u003eWill reset TCM adaptives any time you wish with a simple push of the “BACK” and cruise on\/off buttons.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eESP full on\/off\u003c\/strong\u003e: Press and hold the ESP button for 7 seconds to TOTALLY disable the ESP, ABS, AWD systems. Press and hold again to turn it back on.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRemote Windows: \u003c\/strong\u003eRaise and lower front windows from the keyfob.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eButton Remapping\u003c\/strong\u003e: Use the Adaptive Cruise distance buttons (when ACC is off), or install\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e “Aux” buttons \u003c\/strong\u003e\u003c\/em\u003eor viper cruise button bank and map the buttons for quick access to many of Tazer’s functions.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e …and more.  Check out the user guide for details.\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e*Uconnect performance pages on 8.4″ Uconnect only (2012-2014). EVIC SRT menu and Sport Mode are available on the 4.3″ screen.\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**not on 8-speed vehicles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eINSTALLATION IS A SIMPLE MATTER OF PLUGGING IT INTO THE DIAGNOSTIC OBD2 PORT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2018 and up require installing Double Bypass harness or Bypass Module\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Z Automotive","offers":[{"title":"No My Grand Cherokee is a 2014-2017","offer_id":40958076485797,"sku":"Z_TZR","price":349.0,"currency_code":"CAD","in_stock":true},{"title":"Yes My Grand Cherokee is a 2018-2021","offer_id":40958076518565,"sku":"Z_TZR, Z_SGW","price":446.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/2_e2ab397f-52e6-499b-8a30-68c57a7c8305.png?v=1772575223"},{"product_id":"tazer-programmer-dodge-ram-2013-2018","title":"Tazer Programmer - Dodge Ram (2013-2018)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e2013-2018 1500\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e2019-2021 1500 Classic\u003c\/p\u003e\n\u003cp\u003e2013-2021 2500\/3500\u003c\/p\u003e\n\u003cp\u003eThe Tazer RAM is a plug-in device to change vehicle settings and provide some extra functions that were not available from the factory.  It works on all engine variations, including the diesel.  Needs to have the speedometer cluster that has the ability to display radio station information – only the older base model trucks may have the cluster that does not.  All color displays will work.\u003c\/p\u003e\n\u003cp\u003eTazer RAM features can be broken into two categories;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eVehicle Settings\u003c\/em\u003e – which are changes made to the vehicle which to accommodate changes made to the vehicle or to enable or “unlock” features that technically exist but are disabled by the factory, normally reserved for a higher trim level or package for that vehicle type. These changes will continue to operate after the Tazer RAM is unplugged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eLive Functions\u003c\/em\u003e – which are functions the Tazer RAM performs live, only while plugged in to the OBD2 port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eVehicle Settings:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCalibrate speedometer for non-factory tire sizes (2020\/2021 limited to 35″ max)\u003c\/li\u003e\n\u003cli\u003eConfigure vehicle for gear ratio changes\u003c\/li\u003e\n\u003cli\u003eCan disable Tire Pressure Monitoring System warnings, or modify PSI settings*\u003c\/li\u003e\n\u003cli\u003eCan enable\/disable Daytime Running Lights and the user can select lights to use (application dependent)\u003c\/li\u003e\n\u003cli\u003eCan enable the addition of factory fog lights\u003c\/li\u003e\n\u003cli\u003eCan support LED lights\u003c\/li\u003e\n\u003cli\u003eCan disable Fog Light Dropout (allowing hi and low beams and fog lights on simultaneously)\u003c\/li\u003e\n\u003cli\u003eCan enable the addition of factory backup camera and aftermarket front camera*\u003c\/li\u003e\n\u003cli\u003eCan disable SiriusXM Travellink traffic and weather warnings\u003c\/li\u003e\n\u003cli\u003eCan enable aux video\/audio for front camera and\/or external video source \u003cstrong\u003e(2018+ can only enable one cargo cam input)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan enable factory aux buttons, support addition of power-folding mirrors, and more\u003c\/li\u003e\n\u003cli\u003eOne-touch return-to-stock – Quick “unmarry” function returns all vehicle settings back to stock. No need to remember or write down original settings when returning to stock before dealer service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eLive Functions:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutoFold – Can automatically extend and retract power-folding mirrors when the vehicle is turned on and off\u003c\/li\u003e\n\u003cli\u003eWindows from keyfob – can open and close front door power windows from the keyfob\u003c\/li\u003e\n\u003cli\u003eLine Lock – Uses ABS solenoids to lock the front wheels for burnouts at the track or just for fun\u003c\/li\u003e\n\u003cli\u003eCan enable in-motion navigation address entry\u003c\/li\u003e\n\u003cli\u003eLight Show mode – 6 preset and 3 make-your-own Light shows that flashes all the exterior lights, perfect for car shows. Control from Key Fob or steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal police\/EMS.\u003c\/li\u003e\n\u003cli\u003eCooldown mode: Turn engine fans on-demand when the ignition is on, engine not running – good for the staging lanes at the track or after a run in the trails.\u003c\/li\u003e\n\u003cli\u003eWinch Mode: temporarily raise engine idle to 2000 RPM when winching or jump-starting another vehicle.\u003c\/li\u003e\n\u003cli\u003eSpoof4Lo: raises idle and shift points, and allows the use of lockers and sway bar disconnect in any transfer case mode on Power Wagons\u003c\/li\u003e\n\u003cli\u003eClear CELs – reset that pesky check engine light. Good when you have mods that set the light and you know exactly why.\u003c\/li\u003e\n\u003cli\u003eFully disable ESP\/Traction Control by pressing and holding the ESP button\u003c\/li\u003e\n\u003cli\u003e0 to 30 and 0 to 60 Timers – Displays 0-30 or 0-60 times on EVIC display\u003c\/li\u003e\n\u003cli\u003eFirmware updates – the new firmware is available periodically, always free, and posted to the Z Automotive website. Use ZPU programming utility, also on the website, to load the firmware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e*tire psi setting requires dealer trip, so the vehicle can recognize the change.  Disabling the TPMS system altogether and turning off the warning symbol does NOT require the dealer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eINSTALLATION IS A SIMPLE MATTER OF PLUGGING IT INTO THE DIAGNOSTIC OBD2 PORT WHICH IS LOCATED BY THE PARKING BRAKE (2018+ requires OBD-T Harness)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Z Automotive","offers":[{"title":"No My Ram is a 2013-2017","offer_id":40958083301541,"sku":"Z_TZR_RAM","price":349.0,"currency_code":"CAD","in_stock":true},{"title":"Yes My Ram is a 2018+","offer_id":40958083334309,"sku":"Z_TZR_RAM, Z_OBD_T_LONG","price":405.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/7_8ac11259-e8f7-4a89-9b90-f6a94f00d955.png?v=1772827208"},{"product_id":"tazer-programmer-dodge-ram-classic-2019-2021","title":"Tazer Programmer - Dodge Ram Classic (2019-2021)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e2019-2023 1500 Classic\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2018+ BYPASS HARNESS IS INCLUDED WITH THIS KIT\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Tazer RAM is a plug-in device to change vehicle settings and provide some extra functions that were not available from the factory.  It works on all engine variations, including the diesel.  Needs to have the speedometer cluster that has the ability to display radio station information – only the older base model trucks may have the cluster that does not.  All color displays will work.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTazer RAM features can be broken into two categories;\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003eVehicle Settings\u003c\/em\u003e – which are changes made to the vehicle which to accommodate changes made to the vehicle or to enable or “unlock” features that technically exist but are disabled by the factory, normally reserved for a higher trim level or package for that vehicle type. These changes will continue to operate after the Tazer RAM is unplugged.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003eLive Functions\u003c\/em\u003e – which are functions the Tazer RAM performs live, only while plugged in to the OBD2 port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eVehicle Settings:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCalibrate speedometer for non-factory tire sizes (2020\/2021 limited to 35″ max)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConfigure vehicle for gear ratio changes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan disable Tire Pressure Monitoring System warnings, or modify PSI settings*\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan enable\/disable Daytime Running Lights and the user can select lights to use (application dependent)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan enable the addition of factory fog lights\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan support LED lights\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan disable Fog Light Dropout (allowing hi and low beams and fog lights on simultaneously)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan enable the addition of factory backup camera and aftermarket front camera*\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan disable SiriusXM Travellink traffic and weather warnings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan enable aux video\/audio for front camera and\/or external video source \u003cstrong data-mce-fragment=\"1\"\u003e(2018+ can only enable one cargo cam input)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan enable factory aux buttons, support addition of power-folding mirrors, and more\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOne-touch return-to-stock – Quick “unmarry” function returns all vehicle settings back to stock. No need to remember or write down original settings when returning to stock before dealer service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eLive Functions:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAutoFold – Can automatically extend and retract power-folding mirrors when the vehicle is turned on and off\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWindows from keyfob – can open and close front door power windows from the keyfob\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLine Lock – Uses ABS solenoids to lock the front wheels for burnouts at the track or just for fun\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan enable in-motion navigation address entry\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLight Show mode – 6 preset and 3 make-your-own Light shows that flashes all the exterior lights, perfect for car shows. Control from Key Fob or steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal police\/EMS.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCooldown mode: Turn engine fans on-demand when the ignition is on, engine not running – good for the staging lanes at the track or after a run in the trails.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWinch Mode: temporarily raise engine idle to 2000 RPM when winching or jump-starting another vehicle.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSpoof4Lo: raises idle and shift points, and allows the use of lockers and sway bar disconnect in any transfer case mode on Power Wagons\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eClear CELs – reset that pesky check engine light. Good when you have mods that set the light and you know exactly why.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFully disable ESP\/Traction Control by pressing and holding the ESP button\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0 to 30 and 0 to 60 Timers – Displays 0-30 or 0-60 times on EVIC display\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFirmware updates – the new firmware is available periodically, always free, and posted to the Z Automotive website. Use ZPU programming utility, also on the website, to load the firmware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e*tire psi setting requires dealer trip, so the vehicle can recognize the change.  Disabling the TPMS system altogether and turning off the warning symbol does NOT require the dealer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eINSTALLATION IS A SIMPLE MATTER OF PLUGGING IT INTO THE DIAGNOSTIC OBD2 PORT WHICH IS LOCATED BY THE PARKING BRAKE (2018+ requires OBD-T Harness)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40958093000869,"sku":"Z_TZR_RAM, Z_OBD_T_LONG","price":405.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/8_85039f73-697d-4ca1-9237-5c2486eb9f67.png?v=1772827359"},{"product_id":"tazer-programmer-dt-dodge-ram-1500-5th-gen-2019-2023","title":"Tazer Programmer Dt - Dodge Ram 1500 5Th Gen (2019-2024)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eTazer DT is to be an essential tool for owners of the new 2019 + Ram 1500 (New Body Style Only, including Ram TRX)\u003c\/p\u003e\n\u003cp\u003eSimple, plug-in installation – simply unplug the SGW module and plug the Tazer DT Mini in its place. It is located above the OBD2 Diagnostic connector.\u003c\/p\u003e\n\u003cp\u003eThere are two sets of features – those that program the vehicle to accommodate modifications made to the Ram, and “live” features.\u003c\/p\u003e\n\u003cp\u003eThese are all accessed using the dash display, using steering wheel buttons to navigate the menus.\u003c\/p\u003e\n\u003cp\u003eSettings – once the Tazer is “married” to the Ram, the following menus can be accessed. Unmarrying the Tazer DT will bring the settings back to stock.\u003c\/p\u003e\n\u003cp\u003ePerf menu:\u003cbr\u003eAdjust for alternate tire sizes up to 41″\u003cbr\u003eAdjust for alternate axle gear ratios\u003cbr\u003eAdjust for an alternate transfer case LO range ratio\u003c\/p\u003e\n\u003cp\u003eTPMS menu:\u003cbr\u003eDisable the TPMS system if desired\u003cbr\u003eChange font\/rear TPMS warning PSI limit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRadio menu:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisable Backup camera\u003c\/li\u003e\n\u003cli\u003eEnable Cargo\/front\/undercarriage Camera input\u003c\/li\u003e\n\u003cli\u003eEnable CD audio input\u003c\/li\u003e\n\u003cli\u003eDisable Travellink (weather warnings included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLighting Menu\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChange DRL location\u003c\/li\u003e\n\u003cli\u003eDisable DRL Dropout\u003c\/li\u003e\n\u003cli\u003eEnable Fog lamp output\u003c\/li\u003e\n\u003cli\u003eDisable Fog lamp dropout\u003c\/li\u003e\n\u003cli\u003eDisable one-touch lane change\u003c\/li\u003e\n\u003cli\u003eDisable Halo’s\u003c\/li\u003e\n\u003cli\u003eSet LED 3rd brake light type.\u003c\/li\u003e\n\u003cli\u003eSet LED Fog light type\u003c\/li\u003e\n\u003cli\u003eSet LED tail lamp type\u003c\/li\u003e\n\u003cli\u003eSet LED front turn signal type.\u003c\/li\u003e\n\u003cli\u003eSet Trailer Tow output for use with Mopar kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOther menus\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisable\/Enable Front and Rear Lockers (for axle swap on Powerwagon)\u003c\/li\u003e\n\u003cli\u003eEnable Aux switch settings on the radio\u003c\/li\u003e\n\u003cli\u003eEnable Blind spot detection (sensors required)\u003c\/li\u003e\n\u003cli\u003eChange cluster splash screen to various Ram models\u003c\/li\u003e\n\u003cli\u003eEnable\/Disable PANIC button on remote\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLive features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight shows: Can be accessed from the key fob or the on-screen menu. Six pre-set light shows, and three make-your-own shows included. Set from the factory to only operate when parked, but can be unlocked for off-road, parade, and emergency personnel use.\u003c\/li\u003e\n\u003cli\u003eAutomatic Power folding mirrors – mirrors fold and extend when the ignition is turned on\/off\u003c\/li\u003e\n\u003cli\u003eControl front windows up\/down from keyfob\u003c\/li\u003e\n\u003cli\u003eDisable Navigation in-motion lockout – enter addresses while the vehicle is moving\u003c\/li\u003e\n\u003cli\u003eDisable camera lockout – use the backup camera and\/or added cargo\/front\/undercarriage camera at any speed for any length of time\u003c\/li\u003e\n\u003cli\u003eAuto Traction Kill – remembers the last state of traction control and will set it on start-up\u003c\/li\u003e\n\u003cli\u003eAuto stop-start Disable – remembers the previous state of ESS system and will set it on start-up\u003c\/li\u003e\n\u003cli\u003eAuto Tow Mode – remembers the last state of Tow mode and will set it on start-up\u003c\/li\u003e\n\u003cli\u003eTurnCAM – can turn on backup camera whenever turn signals are used\u003c\/li\u003e\n\u003cli\u003e0-30 and 0-60 timers\u003c\/li\u003e\n\u003cli\u003eCooldown mode – run engine fans when Ram is off, to aid in cooldown\u003c\/li\u003e\n\u003cli\u003eWinch mode – raise engine idle to 2000 RPM while winching or jumping another vehicle\u003c\/li\u003e\n\u003cli\u003eLine Lock: Can lock front brakes for an easy burnout\u003c\/li\u003e\n\u003cli\u003eRock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle still, especially helpful when off-road.\u003c\/li\u003e\n\u003cli\u003eButton Mapping: Use cruise up, down and right buttons as quick-access to some of Tazer DT’s functions, when cruise control is off\u003c\/li\u003e\n\u003cli\u003eClear Check engine light\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40958098702501,"sku":"Z_TZR_DT","price":455.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/Instagram_highlights_covers.png?v=1772570488"},{"product_id":"tazer-programmer-dt-dodge-ram-trx-2021-2023","title":"Tazer Programmer Dt - Dodge Ram Trx (2021-2024)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eTazer DT is to be an essential tool for owners of the new 2021 + Ram TRX \u003c\/p\u003e\n\u003cp\u003eSimple, plug-in installation – simply unplug the SGW module and plug the Tazer DT Mini in its place. It is located above the OBD2 Diagnostic connector.\u003c\/p\u003e\n\u003cp\u003eThere are two sets of features – those that program the vehicle to accommodate modifications made to the Ram, and “live” features.\u003c\/p\u003e\n\u003cp\u003eThese are all accessed using the dash display, using steering wheel buttons to navigate the menus.\u003c\/p\u003e\n\u003cp\u003eSettings – once the Tazer is “married” to the Ram, the following menus can be accessed. Unmarrying the Tazer DT will bring the settings back to stock.\u003c\/p\u003e\n\u003cp\u003ePerf menu:\u003cbr\u003eAdjust for alternate tire sizes up to 41″\u003cbr\u003eAdjust for alternate axle gear ratios\u003cbr\u003eAdjust for an alternate transfer case LO range ratio\u003c\/p\u003e\n\u003cp\u003eTPMS menu:\u003cbr\u003eDisable the TPMS system if desired\u003cbr\u003eChange font\/rear TPMS warning PSI limit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRadio menu:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisable Backup camera\u003c\/li\u003e\n\u003cli\u003eEnable Cargo\/front\/undercarriage Camera input\u003c\/li\u003e\n\u003cli\u003eEnable CD audio input\u003c\/li\u003e\n\u003cli\u003eDisable Travellink (weather warnings included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLighting Menu\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChange DRL location\u003c\/li\u003e\n\u003cli\u003eDisable DRL Dropout\u003c\/li\u003e\n\u003cli\u003eEnable Fog lamp output\u003c\/li\u003e\n\u003cli\u003eDisable Fog lamp dropout\u003c\/li\u003e\n\u003cli\u003eDisable one-touch lane change\u003c\/li\u003e\n\u003cli\u003eDisable Halo’s\u003c\/li\u003e\n\u003cli\u003eSet LED 3rd brake light type.\u003c\/li\u003e\n\u003cli\u003eSet LED Fog light type\u003c\/li\u003e\n\u003cli\u003eSet LED tail lamp type\u003c\/li\u003e\n\u003cli\u003eSet LED front turn signal type.\u003c\/li\u003e\n\u003cli\u003eSet Trailer Tow output for use with Mopar kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOther menus\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisable\/Enable Front and Rear Lockers (for axle swap on Powerwagon)\u003c\/li\u003e\n\u003cli\u003eEnable Aux switch settings on the radio\u003c\/li\u003e\n\u003cli\u003eEnable Blind spot detection (sensors required)\u003c\/li\u003e\n\u003cli\u003eChange cluster splash screen to various Ram models\u003c\/li\u003e\n\u003cli\u003eEnable\/Disable PANIC button on remote\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLive features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight shows: Can be accessed from the key fob or the on-screen menu. Six pre-set light shows, and three make-your-own shows included. Set from the factory to only operate when parked, but can be unlocked for off-road, parade, and emergency personnel use.\u003c\/li\u003e\n\u003cli\u003eAutomatic Power folding mirrors – mirrors fold and extend when the ignition is turned on\/off\u003c\/li\u003e\n\u003cli\u003eControl front windows up\/down from keyfob\u003c\/li\u003e\n\u003cli\u003eDisable Navigation in-motion lockout – enter addresses while the vehicle is moving\u003c\/li\u003e\n\u003cli\u003eDisable camera lockout – use the backup camera and\/or added cargo\/front\/undercarriage camera at any speed for any length of time\u003c\/li\u003e\n\u003cli\u003eAuto Traction Kill – remembers the last state of traction control and will set it on start-up\u003c\/li\u003e\n\u003cli\u003eAuto stop-start Disable – remembers the previous state of ESS system and will set it on start-up\u003c\/li\u003e\n\u003cli\u003eAuto Tow Mode – remembers the last state of Tow mode and will set it on start-up\u003c\/li\u003e\n\u003cli\u003eTurnCAM – can turn on backup camera whenever turn signals are used\u003c\/li\u003e\n\u003cli\u003e0-30 and 0-60 timers\u003c\/li\u003e\n\u003cli\u003eCooldown mode – run engine fans when Ram is off, to aid in cooldown\u003c\/li\u003e\n\u003cli\u003eWinch mode – raise engine idle to 2000 RPM while winching or jumping another vehicle\u003c\/li\u003e\n\u003cli\u003eLine Lock: Can lock front brakes for an easy burnout\u003c\/li\u003e\n\u003cli\u003eRock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle still, especially helpful when off-road.\u003c\/li\u003e\n\u003cli\u003eButton Mapping: Use cruise up, down and right buttons as quick-access to some of Tazer DT’s functions, when cruise control is off\u003c\/li\u003e\n\u003cli\u003eClear Check engine light\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40958100963493,"sku":"Z_TZR_DT","price":461.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/Instagram_highlights_covers.png?v=1772570488"},{"product_id":"tazer-jl-jt-mini-programmer-all-features-unlocked-jeep-wrangler-jl-gladiator-jt-2018-2023","title":"Tazer Jl \/ JT Mini Programmer (all features unlocked) - Jeep Wrangler JL \/ Gladiator JT (2018-2023)","description":"WORKS ON ALL VARIANTS OF THE JEEP WRANGLER AND GLADIATOR\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSimple, plug-in installation – simply unplug the SGW module and plug the Tazer JL Mini in its place. Located above the OBD2 Diagnostic connector. To make it easier for removal and reinstallation for dealer visits, add on our SGW Extension Cable.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFeatures are all accessed using the dash display, using steering wheel buttons to navigate the menus.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTazer JL Mini features can be broken into two categories;\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eVehicle Settings – which are changes made to the Jeep like tire size, gear ratios,\u003cbr data-mce-fragment=\"1\"\u003eor change settings to accommodate other upgrades or modifications. These\u003cbr data-mce-fragment=\"1\"\u003echanges will continue to operate after the Tazer JL Mini is unplugged.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eLive Functions – which are functions the Tazer JL Mini performs live, only while\u003cbr data-mce-fragment=\"1\"\u003eplugged in.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eVehicle Settings:\u003cbr data-mce-fragment=\"1\"\u003e– Change Tire Size\u003cbr data-mce-fragment=\"1\"\u003e– Change Gear Ratio\u003cbr data-mce-fragment=\"1\"\u003e– Change Transfer case LOW ratio\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable TPMS system\u003cbr data-mce-fragment=\"1\"\u003e– Change TPMS pressure warning limit front\/rear (25psi-85psi)\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable Backup camera\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable Cargo Camera input (8.4 Uconnect only)*\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable CD (wired audio) input*\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable TravelLink\/XM traffic\u0026amp;weather\u003cbr data-mce-fragment=\"1\"\u003e– Change Daytime Running Lights (DRL) region (type)\u003cbr data-mce-fragment=\"1\"\u003e– Change DRL location\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable DRL Dropout function\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable factory fog lights\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable Fog Light Dropout (when Fogs shut off while High Beams are on)\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable Factory Halo lights (including BCM output for adding Halo’s)\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable One-touch lane change\u003cbr data-mce-fragment=\"1\"\u003e– Change Headlight type (std\/LED)\u003cbr data-mce-fragment=\"1\"\u003e– Change Fog light type (std\/LED)\u003cbr data-mce-fragment=\"1\"\u003e– Change Taillight type (std\/LED)\u003cbr data-mce-fragment=\"1\"\u003e– Change Front Turn Signal type (std\/LED) – supports aftermarket LED lights too\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable Trailer Tow setting\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable Aux Button settings\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable Blind Spot detection (if hardware added or removed)\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable\/Change Parksense configuration\u003cbr data-mce-fragment=\"1\"\u003e– Disable Electronic Sway Bar (if removed from vehicle)\u003cbr data-mce-fragment=\"1\"\u003e– Disable Front Axle Disconnect module for axle swaps\u003cbr data-mce-fragment=\"1\"\u003e– Disable Front and Rear Lockers for axle swaps\u003cbr data-mce-fragment=\"1\"\u003e– Disable Electronic Steering Pump for hydraulic steering conversions\u003cbr data-mce-fragment=\"1\"\u003e– Change cluster splash screen Wrangler\/Sahara\/Rubicon\u003cbr data-mce-fragment=\"1\"\u003e– Change HVAC controls setting to allow use of dual zone controls on single zone Jeep (for those upgrading the 5″ radio)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Enable HomeLink for those that add the Homelink Visor and harness\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Enable Proximity Entry for those that add the door handles and harnesses\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Enable 115v bed outlet for those that add the hardware on Gladiators\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Enable Automatic Headlamps (If hardware added)\u003cbr data-mce-fragment=\"1\"\u003e– Enable\/Disable PANIC button on remote\u003cbr data-mce-fragment=\"1\"\u003e– One-touch return-to-stock – Quick “unmarry” function returns all vehicle settings back to\u003cbr data-mce-fragment=\"1\"\u003estock.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eLive Functions:\u003cbr data-mce-fragment=\"1\"\u003e– AutoStopStart disable – remembers last state of the auto stop start system and will set it for\u003cbr data-mce-fragment=\"1\"\u003eyou the next time you start the vehicle\u003cbr data-mce-fragment=\"1\"\u003e– AutoTracKill – remembers last state of traction control system and will set it for you the next\u003cbr data-mce-fragment=\"1\"\u003etime you start the vehicle\u003cbr data-mce-fragment=\"1\"\u003e– Can disconnect sway bar in 2WD up to 30mph (any speed if button mapped SwayKill is used)\u003cbr data-mce-fragment=\"1\"\u003e– Can use backup camera and added cargo\/front\/undercarriage camera or media player at\u003cbr data-mce-fragment=\"1\"\u003eany speed\u003cbr data-mce-fragment=\"1\"\u003e– TurnCAM – automatic backup camera when turn signals are used (8.4 uconnect only)\u003cbr data-mce-fragment=\"1\"\u003e– Dark Mode- Turns off all exterior lighting and dash\/radio\/shifter lights while parked with\u003cbr data-mce-fragment=\"1\"\u003eengine running.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e-3rd Brake Flash – Set rate and number of flashes to pulse the 3rd brake light when brakes are applied for increased visibility\u003cbr data-mce-fragment=\"1\"\u003e– Light Show mode – 6 preset and 3 make-your-own Light shows that flashes all the exterior\u003cbr data-mce-fragment=\"1\"\u003elights, perfect for car shows\/first responders\/off-road visibility. Control from Key Fob or\u003cbr data-mce-fragment=\"1\"\u003esteering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal\u003cbr data-mce-fragment=\"1\"\u003epolice\/EMS.\u003cbr data-mce-fragment=\"1\"\u003e– Axle Locker control (Rubicon) – Engage lockers in 2WD and 4Hi on demand.– TC Kill – Tuns off traction control, stability control and ABS.\u003cbr data-mce-fragment=\"1\"\u003e– Hood Alarm – When the vehicle theft alarm is armed, monitors hood activity and will sound\u003cbr data-mce-fragment=\"1\"\u003ethe alarm and flash light shows if opened.\u003cbr data-mce-fragment=\"1\"\u003e– Cooldown mode: Turn engine fans on demand when the ignition is on, engine not running\u003cbr data-mce-fragment=\"1\"\u003e– Line Lock: Can lock front brakes for an easy burnout\u003cbr data-mce-fragment=\"1\"\u003e– Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle\u003cbr data-mce-fragment=\"1\"\u003estill, especially helpful when off-road.\u003cbr data-mce-fragment=\"1\"\u003e– Winch Mode: Raise idle to 2000 RPM with a simple button press.\u003cbr data-mce-fragment=\"1\"\u003e– Button Mapping: Use cruise up, down and right buttons as quick-access to some of Tazer\u003cbr data-mce-fragment=\"1\"\u003eJL’s functions, when cruise control is off.\u003cbr data-mce-fragment=\"1\"\u003e– Display DTC’s – Shows the diagnostic codes that’s making the check engine light come on.\u003cbr data-mce-fragment=\"1\"\u003e– Clear CELs – Reset that pesky check engine light. Good when you have mods that set the\u003cbr data-mce-fragment=\"1\"\u003elight and you know exactly why.\u003cbr data-mce-fragment=\"1\"\u003e– 0 to 30 and 0 to 60 Timers – Displays 0-30 or 0-60 times on EVIC display\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Automatically blanks license plate lights when in Reverse on Gladiators, to remove glare on the backup camera at night.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Vacuum\/Boost gauge – Watch real-time Manifold Pressure, great for boosted\/turbo applications\u003cbr data-mce-fragment=\"1\"\u003e– Firmware updates – the new firmware is available periodically, always free!\u003cbr data-mce-fragment=\"1\"\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40958429659301,"sku":"Z_TZR_JLM","price":461.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/2_0f7f6908-fcfe-4d59-8ac1-d45f541ee630.png?v=1772573362"},{"product_id":"tazer-jl-jt-lite-programmer-limited-features-jeep-wrangler-jl-gladiator-jt-2018-2023","title":"Tazer Jl \/ JT Lite Programmer (limited features) - Jeep Wrangler JL \/ Gladiator JT (2018-2023)","description":"\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta charset=\"UTF-8\"\u003e\n\u003ch2\u003e\u003cstrong\u003eSUPPORTS THE JEEP WRANGLER JL and GLADIATOR \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eSimple, plug-in installation – Tazer JL Lite simply plugs in, in place of your SGW module. Supports 2018+ Wrangler JL and Jeep Gladiator\u003c\/p\u003e\n\u003cp\u003eFeatures are all accessed using the dash display, using steering wheel buttons to navigate the menus.\u003c\/p\u003e\n\u003cp\u003eTazer JL Lite features can be broken into two categories;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Settings\u003c\/strong\u003e – which are changes made to the Jeep-like tire size, gear ratios,\u003cbr\u003eor change settings to accommodate other upgrades or modifications. These\u003cbr\u003echanges will continue to operate after the Tazer JL Lite is unplugged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLive Functions\u003c\/strong\u003e – which are functions the Tazer JL Lite performs live, only while\u003cbr\u003eplugged in.\u003c\/p\u003e\n\u003cp\u003eVehicle Settings:\u003cbr\u003e– Change Tire Size\u003cbr\u003e– Change Gear Ratio\u003cbr\u003e– Change Transfer case LOW ratio\u003cbr\u003e– Enable\/Disable TPMS system\u003cbr\u003e– Change TPMS pressure warning limit front\/rear (25psi-85psi)\u003cbr\u003e– One-touch return-to-stock – Quick “unmarry” function returns all vehicle settings back to\u003cbr\u003estock.\u003c\/p\u003e\n\u003cp\u003eLive Functions:\u003cbr\u003e– AutoStopStart disable – remembers the last state of the auto stop-start system and will set it for\u003cbr\u003eyou the next time you start the vehicle\u003cbr\u003e– AutoTracKill – remembers the last state of the traction control system and will set it for you the next\u003cbr\u003ethe time you start the vehicle\u003cbr\u003e– Can disconnect sway bar in 2WD up to 30mph\u003cbr\u003e– Light Show mode – 6 preset and 3 make-your-own Light shows that flashes all the exterior\u003cbr\u003elights, perfect for car shows\/first responders\/off-road visibility. Control from Key Fob or\u003cbr\u003esteering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal\u003cbr\u003epolice\/EMS.\u003cbr\u003e– Cooldown mode: Turn engine fans on-demand when the ignition is on, engine not running\u003cbr\u003e– Line Lock: Can lock front brakes for an easy burnout\u003cbr\u003e– Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle\u003cbr\u003estill, especially helpful when off-road.\u003cbr\u003e– Winch Mode: Raise idle to 2000 RPM with a simple button press.\u003cbr\u003e– Display DTC’s – Shows the diagnostic codes that are making the check engine light come on.\u003cbr\u003e– Clear CELs – Reset that pesky check engine light. Good when you have mods that set the\u003cbr\u003elight and you know exactly why.\u003cbr\u003e– 0 to 30 and 0 to 60 Timers – Displays 0-30 or 0-60 times on EVIC display\u003cbr\u003e– Firmware updates – the new firmware is available periodically, always free!\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/TAZER_JL_LITE_VS_TAZER_JL_MINI_COMPARISON_LIST_JPEG_REVISED_HONEYCOMP_2048x2048.jpg?v=1633726386\"\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40958431854757,"sku":"Z_TZR_JLL","price":307.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/6_5b6a9703-96bc-48c7-b0ad-9f041b191a5c.png?v=1772826799"},{"product_id":"obd-t-bypass-module-for-tazer-programmer-18-21-ram-classic-18-21-ram-2500-3500","title":"Obd T Bypass Module For Tazer Programmer (18-21) Ram Classic \/ (18-21) Ram 2500\/3500","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eA simple, easy to install solution to adding an OBD2 port that bypasses the Security Gateway on most FCA vehicles.  Simply snap out your factory OBDII connector from its bracket, and snap in one of the female OBDII connectors from this harness.  This gives you an additional OBD2 port right behind the factory port that’s not blocked by the security gateway.   The port cannot communicate with the radio using this harness so if you are using a Tazer, Navigation In Motion and TurnCam won’t work.\u003c\/p\u003e\n\u003cp\u003eIdeal for 2018+ Rams\u003c\/p\u003e\n\u003cp\u003eAlso will work on Jeeps, Charger, Challenger, and many others.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40958448664741,"sku":"Z_OBD_T_LONG","price":56.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/3_9e0f9dd5-dad2-46e4-bcf6-1d866dfd136e.png?v=1772827519"},{"product_id":"obd-extension-for-tazer-programmer","title":"Obd Extension For Tazer Programmer","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eUse this handy 12 inch OBD2 extension cable as a simple solution to hiding your Tazer or BurnBox out of sight.  Contains all 16 wires of the OBDII connector – which are needed for a Tazer to operate properly – unlike some other versions on the market which only contain a subset.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40958455644325,"sku":"Z_OBD_EXT","price":24.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/products\/7_4093f92d-19c2-446b-9ea9-f9dddeb75152.png?v=1635308632"},{"product_id":"double-bypass-for-tazer-programmer-challenger-15-23-charger-11-23","title":"Double Bypass For Tazer Programmer (Challenger 15-23 \/ Charger 11-23)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e2018+ Dodge\/Chrysler\/Jeep vehicles all have a new security module that renders the OBD2 port inoperable for all aftermarket devices and tuners.\u003c\/p\u003e\n\u003cp\u003eThe Double Bypass kit overcomes this obstacle by installing a secondary OBD2 port in the trunk, bypassing the security module.\u003c\/p\u003e\n\u003cp\u003eQuick installation!  takes under 5 minutes to install, no wire splicing or cutting – plug and play. \u003cspan\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/zautomotive.com\/wp-content\/uploads\/2017\/11\/Double-Bypass-Installation-100.pdf?14a23e\u0026amp;14a23e\"\u003e*See Instruction Manual Here \u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Double Bypass will also work on 2011-2017 Chargers\/300s and 2015-2017 Challengers, for those that want to relocate their Z Automotive devices to the trunk, freeing up the factory OBD2 port for their Diablo Sport \/ SCT \/ HP Tuners device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eprotected by us patent design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40986373882021,"sku":"Z_DBP","price":78.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/2_a9094706-f35f-4b58-8141-25abd8abc15e.png?v=1772574478"},{"product_id":"hdmi-av-input-kit-for-8-4-and-12-uconnect","title":"Hdmi Av Input Kit For 8.4_ And 12_ Uconnect","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv\u003eThis is a plug and play kit for adding an HDMI feed to your Uconnect radio.  It contains the HDMI-to-analog converter, 12v-USB dual power supply and all wires and harnesses to make adding video easy.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe power supply can power an additional USB powered device, typically a Firestick, Roku, Chromecast, etc.  The power supply comes with a custom harness that grabs power from the back of the accessory outlet, so there’s no wire tapping required.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis product requires that you have a Tazer to enable the video inputs and\/or Cargo Camera input depending on model.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eWorks on the following vehicles:\u003c\/div\u003e\n\u003cdiv\u003e2018-2021 Wrangler and Gladiator with 8.4″ Uconnect\u003c\/div\u003e\n\u003cdiv\u003e2014-2017 Ram 1500\/2500\/3500 with 8.4″ Uconnect\u003c\/div\u003e\n\u003cdiv\u003e2019-2021 Ram 1500 DT(requires nav equipped 8.4″ or 12″ Uconnect)\u003c\/div\u003e\n\u003cdiv\u003e2014-2017 Grand Cherokee\/Durango\u003c\/div\u003e\n\u003cdiv\u003e2015-2017 Charger\/Challenger\/300\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40986385875109,"sku":"Z_HDMI_KIT_A","price":265.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/2_26bb77fc-b12c-4108-bc22-f39339fd6974.png?v=1772828379"},{"product_id":"av-cable-kit-for-8-4-uconnect","title":"Av Cable Kit For 8.4_ Uconnect","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv\u003eThis is a plug and play kit for adding an HDMI feed to your Uconnect radio.  It contains the HDMI-to-analog converter, 12v-USB dual power supply and all wires and harnesses to make adding video easy.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe power supply can power an additional USB powered device, typically a Firestick, Roku, Chromecast, etc.  The power supply comes with a custom harness that grabs power from the back of the accessory outlet, so there’s no wire tapping required.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis product requires that you have a Tazer to enable the video inputs and\/or Cargo Camera input depending on model.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eWorks on the following vehicles:\u003c\/div\u003e\n\u003cdiv\u003e2018-2021 Wrangler and Gladiator with 8.4″ Uconnect\u003c\/div\u003e\n\u003cdiv\u003e2014-2017 Ram 1500\/2500\/3500 with 8.4″ Uconnect\u003c\/div\u003e\n\u003cdiv\u003e2019-2021 Ram 1500 DT(requires nav equipped 8.4″ or 12″ Uconnect)\u003c\/div\u003e\n\u003cdiv\u003e2014-2017 Grand Cherokee\/Durango\u003c\/div\u003e\n\u003cdiv\u003e2015-2017 Charger\/Challenger\/300 .\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40986402750629,"sku":"Z_AV_KIT","price":92.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/products\/MYTRUCKHASOEMLEDTAILLIGHTS-14_cee47e6e-3942-4216-8ca0-a6a62b8141bf.png?v=1635355728"},{"product_id":"z-locker-oem-axle-locker-sensor-fix-jeep-gladiator-wrangler-jl","title":"Z Locker Oem Axle Locker Sensor Fix (Jeep Gladiator \/ Wrangler Jl)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eDeveloped in a partnership with Americas Most Wanted 4X4! The locker sensor in Wrangler JL and Gladiator Rubicons have started to become problematic.  When they fail, it usually starts out as a blinking locker indicator on the dash, which then ends up in a “service axle locker” message.  Once the locker system is in this fault state, the lockers will no longer engage.\u003c\/p\u003e\n\u003cp\u003eThe repair would normally be to replace the sensor, but the part is not available separately.  The next best thing would be to replace the locker assembly, but that’s not available either.  The current solution is to replace the entire axle assembly, but due to the commonality of this problem, they are on national back-order.\u003c\/p\u003e\n\u003cp\u003eThe Z-Locker-OEM solves this problem.  Bypassing the problematic sensor, it allows the locker to operate without the position sensor yet provides the proper feedback to the Jeep’s computers to keep the system operational without any errors or warnings.  \u003cstrong\u003eYou get fully functioning lockers with no side effects\u003c\/strong\u003e from using the Z-Locker-OEM.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple; unplug the locker, plug the Z-Locker-OEM in between the axle and Jeep harness.  This can be done in seconds with no tools.  Will not harm the Jeep’s computers – it uses the same signaling that it expects from the sensor.  Connectors are the same ones used by Jeep and are watertight.\u003c\/p\u003e\n\u003cp\u003ePackage contains one Z-Locker-OEM, to service \u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eone \u003c\/strong\u003e\u003c\/span\u003efailed axle locker.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40986421493925,"sku":"Z_LKR_OEM","price":251.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/2_77d1de69-4976-4735-9fb9-65812e1bb8b9.png?v=1772831442"},{"product_id":"tazer-jk-blaster-programmer-jeep-jk-07-17","title":"Tazer Jk Blaster Programmer- Jeep Jk (07-17)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eCustomizer's Must-Have Tool:\u003c\/strong\u003e This powerful yet intuitive module allows controllability over the features your Jeep is equipped with so you can truly personalize your Jeep Wrangler JK driving experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUser-Friendly :\u003c\/strong\u003e Easy plug and play installation directly into your JK OBD2 port. View and make changes directly from your smartphone via the JK Blaster App.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvanced Lighting Options \u0026amp; Functionality:\u003c\/strong\u003e The light show mode is perfect for show jeeps and emergency vehicle conversions by allowing preset and customizable light arrays. This cool feature can wow the Jeep club community, and be activated in parades for show Jeeps and first responders alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Advanced Off-Road Settings:\u003c\/strong\u003e If you crawl rocky terrain, air down for beach running and surf fishing, control your intrusive TPMS system by disabling or making thresh hold adjustments to the alerts for your tire's psi's from 25 - 85.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003eAdjustments\/programming:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eTire size\u003c\/li\u003e\n\u003cli\u003eGear Ratio\u003c\/li\u003e\n\u003cli\u003eTransfer Case Ratio\u003c\/li\u003e\n\u003cli\u003eTPMS Psi settings\u003c\/li\u003e\n\u003cli\u003eTPMS Enable\/Disable\u003c\/li\u003e\n\u003cli\u003eDRL Enable\u003c\/li\u003e\n\u003cli\u003eDRL Locations\u003c\/li\u003e\n\u003cli\u003eOne-Touch Lane Change Enable\/Disable\u003c\/li\u003e\n\u003cli\u003eBackup camera enable for MyGig radio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eLive Functions:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eLock front and\/or rear axle on demand (Rubicon)\u003c\/li\u003e\n\u003cli\u003eLine Lock (for easy burnouts)\u003c\/li\u003e\n\u003cli\u003e6 Light Shows flashes all exterior lights\u003c\/li\u003e\n\u003cli\u003eWinch Mode (Idle up)\u003c\/li\u003e\n\u003cli\u003eRead and clear DTC’s with troubleshooting data for every DTC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eOther:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eOnline updates\u003c\/li\u003e\n\u003cli\u003eWiFi and Bluetooth connectivity\u003c\/li\u003e\n\u003cli\u003eFully sleeps when the vehicle is off so it can stay plugged in and is always ready for use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eNote: Many features are intended for off-road use only, and check your state's local regulations as it pertains to lighting usage.\u003c\/strong\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003csection id=\"section_1399585273\" class=\"section dark hide-for-small\"\u003e\n\u003cdiv class=\"section-content relative\"\u003e\n\u003cdiv id=\"row-501038197\" class=\"row row-collapse row-full-width align-middle\"\u003e\n\u003cdiv data-animated=\"true\" data-animate=\"blurIn\" class=\"col medium-6 small-12 large-6\" id=\"col-1489216744\"\u003e\n\u003cdiv class=\"col-inner text-left\"\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection id=\"section_140218131\" class=\"section dark hide-for-small\"\u003e\n\u003cdiv class=\"section-content relative\"\u003e\n\u003cdiv id=\"row-463391678\" class=\"row row-collapse row-full-width align-middle align-center\"\u003e\n\u003cdiv data-animated=\"true\" data-animate=\"blurIn\" class=\"col medium-6 small-12 large-6\" id=\"col-535101154\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40986440433829,"sku":"Z_JK_BLSTR","price":256.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/Instagram_highlights_covers_8b9e366f-cb36-4c82-863d-41db73d30f19.png?v=1772573740"},{"product_id":"obd-t-harness-splitter","title":"Obd T Harness Splitter","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eWant to hide your Tazer or BurnBox the easy way?  Simply snap out your factory OBDII connector from its bracket, and snap in one of the female OBDII connectors from this harness.  This gives you an additional OBDII port right behind the factory port.  You can use two devices at the same time (like a Tazer and a tuner).\u003c\/p\u003e\n\u003cp\u003eWorks on all FCA vehicles.  Does not bypass security on 2018+ vehicles, so you’ll still need a Bypass Module or Double Bypass on those vehicles.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":40986483458213,"sku":"Z_OBD_T","price":41.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/products\/image_73874546-d57f-47b9-8a53-b4f98f797c38.png?v=1634144541"},{"product_id":"security-gateway-bypass-module","title":"Security Gateway Bypass Module","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv dir=\"auto\"\u003eAll 2018+ FCA(Stellantis) vehicles are built with a Security Gateway Module (SGW) that prevents access to the vehicle from the OBD2 port by anything other than the dealer diagnostic tools.\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003eSimply locate and unplug the SGW module, plug the SGW Bypass block in its place.  The OBD2 port will then have full access for use by aftermarket devices such as Z Automotive’s Tazer or BurnBox, tuning tools, and code readers.\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cstrong\u003eNow supporting ALL FCA VEHICLES INCLUDING Alfa Romeo and Fiat Platforms with the second High-Speed CANBUS! \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cstrong\u003eprotected by multiple us patents \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":41042843435173,"sku":"Z_SGW","price":97.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/1_64e55420-5ee1-46c8-97b5-c85df6a9cb35.png?v=1772573953"},{"product_id":"tazer-programmer-dodge-ram-2500-3500-2019-2021","title":"Tazer Programmer - Dodge Ram 2500\/3500 (2019-2021)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e2013-2018 1500\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e2019-2021 1500 Classic\u003c\/p\u003e\n\u003cp\u003e2013-2021 2500\/3500\u003c\/p\u003e\n\u003cp\u003e2022-2023 2500\/3500  (not compatible. we are working out a few bugs on these trucks and will be compatible soon)\u003c\/p\u003e\n\u003cp\u003eThe Tazer RAM is a plug-in device to change vehicle settings and provide some extra functions that were not available from the factory.  It works on all engine variations, including the diesel.  Needs to have the speedometer cluster that has the ability to display radio station information – only the older base model trucks may have the cluster that does not.  All color displays will work.\u003c\/p\u003e\n\u003cp\u003eTazer RAM features can be broken into two categories;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eVehicle Settings\u003c\/em\u003e – which are changes made to the vehicle which to accommodate changes made to the vehicle or to enable or “unlock” features that technically exist but are disabled by the factory, normally reserved for a higher trim level or package for that vehicle type. These changes will continue to operate after the Tazer RAM is unplugged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eLive Functions\u003c\/em\u003e – which are functions the Tazer RAM performs live, only while plugged in to the OBD2 port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eVehicle Settings:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCalibrate speedometer for non-factory tire sizes (2020\/2023 limited to 35″ max)\u003c\/li\u003e\n\u003cli\u003eConfigure vehicle for gear ratio changes\u003c\/li\u003e\n\u003cli\u003eCan disable Tire Pressure Monitoring System warnings, or modify PSI settings*\u003c\/li\u003e\n\u003cli\u003eCan enable\/disable Daytime Running Lights and the user can select lights to use (application dependent)\u003c\/li\u003e\n\u003cli\u003eCan enable the addition of factory fog lights\u003c\/li\u003e\n\u003cli\u003eCan support LED lights\u003c\/li\u003e\n\u003cli\u003eCan disable Fog Light Dropout (allowing hi and low beams and fog lights on simultaneously)\u003c\/li\u003e\n\u003cli\u003eCan enable the addition of factory backup camera and aftermarket front camera*\u003c\/li\u003e\n\u003cli\u003eCan disable SiriusXM Travellink traffic and weather warnings\u003c\/li\u003e\n\u003cli\u003eCan enable aux video\/audio for front camera and\/or external video source \u003cstrong\u003e(2018+ can only enable one cargo cam input)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan enable factory aux buttons, support addition of power-folding mirrors, and more\u003c\/li\u003e\n\u003cli\u003eOne-touch return-to-stock – Quick “unmarry” function returns all vehicle settings back to stock. No need to remember or write down original settings when returning to stock before dealer service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eLive Functions:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutoFold – Can automatically extend and retract power-folding mirrors when the vehicle is turned on and off\u003c\/li\u003e\n\u003cli\u003eWindows from keyfob – can open and close front door power windows from the keyfob\u003c\/li\u003e\n\u003cli\u003eLine Lock – Uses ABS solenoids to lock the front wheels for burnouts at the track or just for fun\u003c\/li\u003e\n\u003cli\u003eCan enable in-motion navigation address entry\u003c\/li\u003e\n\u003cli\u003eLight Show mode – 6 preset and 3 make-your-own Light shows that flashes all the exterior lights, perfect for car shows. Control from Key Fob or steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal police\/EMS.\u003c\/li\u003e\n\u003cli\u003eCooldown mode: Turn engine fans on-demand when the ignition is on, engine not running – good for the staging lanes at the track or after a run in the trails.\u003c\/li\u003e\n\u003cli\u003eWinch Mode: temporarily raise engine idle to 2000 RPM when winching or jump-starting another vehicle.\u003c\/li\u003e\n\u003cli\u003eSpoof4Lo: raises idle and shift points, and allows the use of lockers and sway bar disconnect in any transfer case mode on Power Wagons\u003c\/li\u003e\n\u003cli\u003eClear CELs – reset that pesky check engine light. Good when you have mods that set the light and you know exactly why.\u003c\/li\u003e\n\u003cli\u003eFully disable ESP\/Traction Control by pressing and holding the ESP button\u003c\/li\u003e\n\u003cli\u003e0 to 30 and 0 to 60 Timers – Displays 0-30 or 0-60 times on EVIC display\u003c\/li\u003e\n\u003cli\u003eFirmware updates – the new firmware is available periodically, always free, and posted to the Z Automotive website. Use ZPU programming utility, also on the website, to load the firmware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e*tire psi setting requires dealer trip, so the vehicle can recognize the change.  Disabling the TPMS system altogether and turning off the warning symbol does NOT require the dealer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eINSTALLATION IS A SIMPLE MATTER OF PLUGGING IT INTO THE DIAGNOSTIC OBD2 PORT WHICH IS LOCATED BY THE PARKING BRAKE (2018+ requires OBD-T Harness)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Z Automotive","offers":[{"title":"No My Ram is a 2013-2017","offer_id":42124501090554,"sku":"Z_TZR_RAM","price":349.0,"currency_code":"CAD","in_stock":true},{"title":"Yes My Ram is a 2018-2021","offer_id":42124501123322,"sku":"Z_TZR_RAM, Z_OBD_T_LONG","price":405.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/1_c31ef385-129d-4d45-a562-d19966b05504.png?v=1772827208"},{"product_id":"sgw-extension-cable","title":"Sgw Extension Cable","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e1ft long\u003c\/p\u003e\n\u003cp\u003eTazer JL Mini\/Lite and Tazer DT users, save your fingers!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis simple extension harness plugs into the SGW module and stays there, ready for use.\u003c\/p\u003e\n\u003cp\u003eWhen it’s time to remove the Tazer for a dealer visit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnplug the Tazer\u003c\/li\u003e\n\u003cli\u003ePlug the two-vehicle harness connectors into the extension that is now easily accessible\u003c\/li\u003e\n\u003cli\u003eNo more fumbling and reaching to plug and unplug the SGW for every dealer visit\u003c\/li\u003e\n\u003cli\u003eEasily tucked up out of view\u003c\/li\u003e\n\u003cli\u003eLooks like a Mopar factory harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":42935042375930,"sku":"Z_SGW_EXT","price":41.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/1_431efba2-d4f0-4b3e-81e5-e5b5c69dbdea.png?v=1772574791"},{"product_id":"jeep-wrangler-jl-18-23-front-camera-install-kit","title":"Jeep Wrangler JL (18-23) Front Camera Install Kit","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eGrille mount camera for Jeep Wrangler JL except 4XE and 392 (see JT Camera Kit)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEasy to install, grille-mounted front camera kit for the 2018+ Wrangler JL.  Includes everything needed to install the kit, no wire splicing, no screws.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRequires a Tazer JL or Tazer JL Mini to activate the “cargo camera” input on your screen.  \u003cstrong data-mce-fragment=\"1\"\u003eWorks on the 8.4 Uconnect only\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf the Tazer JL \/ Mini is present, this camera input can be activated at any time, in any drive mode, and at any speed, as long as you want.  It makes a perfect trail camera as well as for parking.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCargo camera input is not a Hi-Definition input like the backup camera, so the video quality will not be as good!  This is a high-quality \u003cem data-mce-fragment=\"1\"\u003estandard definition (480i)\u003c\/em\u003e camera.  There is no way to add a high-definition cargo camera input to the JL radio.\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":44360334115066,"sku":"Z_JL_CAM","price":253.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/2_ef16bd56-6ebd-43e8-a138-06258c985dcd.png?v=1772827993"},{"product_id":"jeep-gladiator-jt-20-23-front-camera-install-kit","title":"Jeep Gladiator\/Wrangler (20-23) Front Camera Install Kit","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eGrille mount camera for Jeep Gladiator (plus Wrangler 4XE and 392)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEasy to install, grille-mounted front camera kit for the 2020+ Jeep Gladiator (and Wrangler 4XE\/392).  Includes everything needed to install the kit, no wire splicing, no screws.\u003c\/p\u003e\n\u003cp\u003eRequires a Tazer JL Mini to activate the “cargo camera” input on your screen.  Works on the 8.4 Uconnect only.\u003c\/p\u003e\n\u003cp\u003eIf the Tazer JL Mini is present, this camera input can be activated at any time, in any drive mode, and at any speed, as long as you want.  It makes a perfect trail camera as well as for parking.\u003c\/p\u003e\n\u003cp\u003eCargo camera input is not a Hi-Definition input like the backup camera, so the video quality will not be as good!  This is a high-quality \u003cem\u003estandard definition (480i)\u003c\/em\u003e camera.  There is no way to add a high-definition cargo camera input to the Jeep radio.\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":44360357314810,"sku":"Z_JT_CAM","price":253.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/3_978e4300-90c9-412e-a55c-1586f871a789.png?v=1772829542"},{"product_id":"z-locker-controller-jeep-gladiator-wrangler-jl","title":"Z-Locker Controller (Jeep Gladiator \/ Wrangler Jl)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eZ-Locker is a simple adapter to plugin using your factory Rubicon harness to your aftermarket E-Lockers or Air Lockers.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsing watertight connectors and a potted design, and automotive-grade internal components, these are made to last in the harsh Jeep undercarriage environment.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOne end of the adapter plugs into the 4 pin factory harness, providing the required signals to keep the Rubicon locker control logic satisfied.  The other end is a 2 pin connector which will output 12 Volts to engage your E-Locker or Air Locker solenoid.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRetain the factory locker switches, dash messages, warnings and will even set off the “service locker” message if your aftermarket locker is faulty or gets disconnected.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf you have a Tazer JL Mini (or Tazer JL), you can use the lockers at your command in 4Hi and 2WD modes as well.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe output connector is an industry-standard part that will plug into most E-Lockers.  Use our optional Locker extension if you have a different mating connector or need to run the wires longer – usually needed for Air Locker installations.  This gives a total reach from the factory locker location of over 7 1\/2 feet.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cdiv class=\"component_title_wrapper\"\u003e\n\u003ch2 class=\"step_title_wrapper component_title\"\u003e\u003cspan class=\"component_title_text step_title_text\"\u003eZ-Locker Extension Harness\u003c\/span\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"component_inner\" id=\"component_1621502805_inner\"\u003e\n\u003cdiv class=\"component_description_wrapper\"\u003e\n\u003cdiv class=\"component_description\"\u003e\n\u003cp\u003eIf using air lockers, you may need to add an extension harness\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ctable id=\"ymm_applicable_list\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGladiator\u003c\/td\u003e\n\u003ctd\u003e2020 - 2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003e2018 - 2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"No extension harness","offer_id":44360409907450,"sku":"Z_LKR_CTLR","price":251.0,"currency_code":"CAD","in_stock":true},{"title":"Add extension harness","offer_id":44360409940218,"sku":"Z_LKR_CTLR, Z_D44_EXT_16","price":301.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/1_ef7c5b25-b1e3-47ea-a60d-f25a69ce406e.png?v=1772831220"},{"product_id":"z-automotive-nolimitz-jl-speed-limiter-torque-management-override-2018-2025-wrangler-jl-2020-2025-gladiator-jt","title":"NoLimitz JL","description":"\u003cp class=\"p1\"\u003eUnleash your Jeep’s full potential with the \u003cspan class=\"s1\"\u003e\u003cb\u003eZ Automotive NoLimitz JL\u003c\/b\u003e\u003c\/span\u003e. This breakthrough plug-and-play module removes factory restrictions without touching your PCM—keeping your warranty intact while giving you full control of your vehicle.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDesigned specifically for Jeep Wrangler JL (2018–2025) and Gladiator JT (2020–2025) with automatic transmissions, the NoLimitz JL disables speed and torque limiters, traction-based torque management, and the MDS system, while also unlocking full power in 2WD for 4XE models.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s2\"\u003e✅ \u003c\/span\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eRemoves factory speed limiter (within safe tire rating limits)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eDisables speed \u0026amp; torque limiters in 4-Low\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eDisables traction-based torque management\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eDisables MDS system (392)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eUnlocks full power in 2WD for 4XE models\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eBlocks RF Hub access to prevent key programming theft\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eOn\/off switchable anytime\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003ePlug-and-play install—no permanent modifications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eLeaves PCM untouched (no warranty issues, no P1400 code)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eUndetectable by dealer tools\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e⚠️ \u003cspan class=\"s1\"\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/span\u003e Not compatible with manual transmission vehicles.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cspan class=\"s2\"\u003e📦 \u003c\/span\u003e\u003cb\u003eVehicle Fitment:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eJeep Wrangler JL (2018–2025, automatic)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eJeep Gladiator JT (2020–2025, automatic)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eWith NoLimitz JL, you get the performance you’ve been missing—without the risks of unlocking or reprogramming your PCM.\u003c\/p\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":47673118589178,"sku":"Z_MIM_NL_JL","price":386.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/image_063c70de-6869-4ae1-8af0-bf516737df82.png?v=1756529140"},{"product_id":"z-automotive-nolimitz-dt-speed-limiter-torque-management-mds-override-2019-2024-ram-1500-dt-2021-2024-ram-trx","title":"NoLimitz DT","description":"\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003e📝 Product Description:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eTake your RAM to the next level with the \u003cspan class=\"s2\"\u003e\u003cb\u003eZ Automotive NoLimitz DT\u003c\/b\u003e\u003c\/span\u003e. This innovative plug-and-play module removes restrictive factory programming without touching the PCM—delivering full performance while keeping your warranty intact.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003ePerfect for RAM 1500 DT (2019–2024) and RAM TRX (2021–2024) owners with 12-inch Uconnect radios, the NoLimitz DT disables factory limiters, torque management, and the MDS system, while also preventing key programming theft by blocking RF Hub access. Unlike the Tazer DT, this module installs in a separate location and can be used alone or alongside the Tazer DT for maximum performance.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s3\"\u003e✅ \u003c\/span\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eRemoves factory speed limiter (within safe tire rating limits)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eDisables torque management \u0026amp; traction control restrictions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eDisables MDS system on equipped motors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003ePrevents theft by blocking RF Hub access (no new key programming)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eFunctions can be turned on or off anytime\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003ePlug-and-play install, no permanent modifications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003ePCM remains untouched—no warranty issues, no P1400 code\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eUndetectable by dealer tools\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e⚠️ \u003cspan class=\"s2\"\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/span\u003e For RAM DT models equipped with smaller radios, use the \u003cspan class=\"s2\"\u003e\u003cb\u003eNoLimitz JL\u003c\/b\u003e\u003c\/span\u003e instead. Not compatible with manual transmission vehicles.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s3\"\u003e📦 \u003c\/span\u003e\u003cb\u003eVehicle Fitment:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eRAM 1500 DT (2019–2024)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eRAM TRX (2021–2024)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eWith \u003cspan class=\"s2\"\u003e\u003cb\u003eNoLimitz DT\u003c\/b\u003e\u003c\/span\u003e, you’ll finally have the freedom to unlock your truck’s true capability—without compromise.\u003c\/p\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":47673119506682,"sku":"Z_MIM_NL_DT","price":386.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/image_7645ab4b-ebbb-49de-8a6a-275fecd36186.png?v=1756529057"},{"product_id":"tazer-programmer-dodge-durango-2014-2023","title":"Tazer Programmer - Dodge Durango (2014-2023)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e2018+ Models: Due to the addition of a security module, a Double Bypass or Security Gateway Bypass Module is REQUIRED for the Tazer to function!\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePLEASE READ THE USER MANUAL TO SEE THE FULL FUNCTION LIST!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeature Enable\u003c\/strong\u003e: The Tazer can unlock SRT Drive modes, including Track, Valet, ECO (2015-18 Scat Pack), enable factory Sport Mode (5 speed and 8 speed), SRT EVIC Performance pages, and SRT performance pages* in the Uconnect 8.4 radio. Enable paddle shifters if you add the factory paddle-equipped steering wheel. Enable factory fog lights, backup camera, extra video input and more. Disable TPMS.  Change DRL’s. Enable Shift Light on 2015+ (6.4L). Disable in motion navigation lockout. Disable seatbelt reminder chime. And more, see the user guide for a full list.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLine Lock: \u003c\/strong\u003ePress 2 steering wheel buttons while stopped, and the ABS valves will hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing required! This is an ideal alternative to the traditional plumbed-in solenoid type line lock\/roll control. Super simple and cannot be detected! When Line Lock is in use, it temporarily disables traction control and for AWD cars, keeps the car in RWD mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLight Shows:\u003c\/strong\u003e Using the key fob or steering wheel buttons and added dash menu, turn on a light show that flashes the exterior lights in 9 different patterns – there are 6 pre-configured patterns and 3 make-your-own.  Perfect for car shows and parades. (can be unlocked for in-motion use, only for legal emergency use.  Contact tech support for instructions)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3rd Brake Flash:\u003c\/strong\u003e Set rate and number of flashes to pulse the 3rd brake light when brakes are applied for increased visibility\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Engine Mode:\u003c\/strong\u003e This allows you to choose which engine mode to stay in.  Very useful on 2015+, where you want the active exhaust to remain open with increased throttle response without the transmission being in track mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Transmission Mode:\u003c\/strong\u003e This allows you to choose which transmission mode to stay in.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce Power Mode:\u003c\/strong\u003e Force key mode (Black\/Red\/Valet)  For Hellcats, you can force red key performance while using the black key.  For most 2015+, you can force valet mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStartup Drive Mode:\u003c\/strong\u003e Like driving in Sport or Track mode every time you get in your car?  Tazer can set the startup drive mode for you, so you don’t need to switch modes every time you get in the car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAuto stop-start Disable:\u003c\/strong\u003e If you have a Grand Cherokee or Durango with Auto StopStart, you may find it annoying and want it to default OFF.  The Tazer can do this for you, no need to press that disable button every time you start the car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSteering Wheel shifting**\u003c\/strong\u003e(SWS): This allows you to use your steering wheel’s cruise+\/- buttons to manually control gear shift while keeping your hands on the wheel. SWS mode is enabled after placing the vehicle in AutoStick mode using the console shifter. Once in AutoStick, use the cruise buttons to shift (only when cruise control is turned off)! This feature can be enabled or disabled at any time using the steering wheel buttons.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAutoUpshift**\u003c\/strong\u003e: Set your own shift points when in AutoStick – Using steering wheel buttons or ZPU Utility, dial in any RPM for upshifts in AutoStick mode – perfect for high-power high-revving track use. This feature requires that “sport mode” is enabled (2012-2014 only).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePeak RPM Display: \u003c\/strong\u003eWill display actual shift RPMs after each shift – great when adjusting AutoUpshift to squeeze every last bit out of that high revving cam, or to check what RPM you hit when shifting manually.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e0 to 30 and 0 to 60 Timer\u003c\/strong\u003e: Will display 0 to 30 and 0 to 60 times on EVIC display. Good for the 2011’s that can’t enable SRT pages.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eForce AWD modes\u003c\/strong\u003e: On AWD models, force the AWD system to stay in RWD or AWD, instead of letting the car decide on its own. Good for racing, drifting, etc. Or set it back to “normal” whenever you wish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset Adaptives: \u003c\/strong\u003eWill reset TCM adaptives any time you wish with a simple push of the “BACK” and cruise on\/off buttons.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eESP full on\/off\u003c\/strong\u003e: Press and hold the ESP button for 7 seconds to TOTALLY disable the ESP, ABS, AWD systems. Press and hold again to turn it back on.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRemote Windows: \u003c\/strong\u003eRaise and lower front windows from the keyfob.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eButton Remapping\u003c\/strong\u003e: Use the Adaptive Cruise distance buttons (when ACC is off), or install\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e “Aux” buttons \u003c\/strong\u003e\u003c\/em\u003eor viper cruise button bank and map the buttons for quick access to many of Tazer’s functions.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e …and more.  Check out the user guide for details.\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e*Uconnect performance pages on 8.4″ Uconnect only (2012-2014). EVIC SRT menu and Sport Mode are available on the 4.3″ screen.\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**not on 8-speed vehicles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eINSTALLATION IS A SIMPLE MATTER OF PLUGGING IT INTO THE DIAGNOSTIC OBD2 PORT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2018 and up require installing Double Bypass harness or Bypass Module\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Z Automotive","offers":[{"title":"No My Durango is a 2014-2017","offer_id":48932088742138,"sku":"Z_TZR","price":349.0,"currency_code":"CAD","in_stock":true},{"title":"Yes My Durango is a 2018-2023","offer_id":48932088774906,"sku":"Z_TZR, Z_SGW","price":446.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/2_e2ab397f-52e6-499b-8a30-68c57a7c8305.png?v=1772575223"},{"product_id":"ram-parksense-fix-2021-ram-dt-models","title":"RAM ParkSense Fix (2021+ Ram DT Models)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDid you install larger tires on your 2021+ Ram DT, and now ParkSense no longer works?  This simple plug-and-play device will get your ParkSense working again, regardless of tire size.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple, 2-minute, no tools, plug-and-play installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSilently gets ParkSense to work as if the factory tires were still installed.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications, cannot be detected by dealer tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Z Automotive","offers":[{"title":"Default Title","offer_id":48934733054202,"sku":"Z_MIM_PS_A","price":316.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/files\/image_d3369fdb-8034-4403-935c-d4ed6b7e9fc8.png?v=1779814155"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0301\/collections\/image_42699279-f138-4603-bd77-3c8927cd51e2.png?v=1753120122","url":"https:\/\/www.esskcustoms.com\/collections\/tazer-programmers.oembed?page=2","provider":"Ess K Customs","version":"1.0","type":"link"}